Plumbing tools

Installation of gutter system

Roof folding tools

Fallow shutters

Bending tongs

Markers and angles

Flat, round and creping pliers

Plastic and wooden hammers

Drazkovnice

Sheet metal shears

Benders

Rolling benders

Extrusion guns

Pomôcky na ohýbanie

Knihy

Markers and angles

ADGA Meterstab

3737

€4.16

ADGA stacked wooden metre with a length of 2 metres, divided into 10 parts which are joined by hard metal buckles, ideal for height measurement

Tools for carpenters and roofers

Red-white cord, 50 m long

103941

€4.49

Polypropylene - high resistance to breakage, good elasticity, length 50 m, thickness 1,7 mm, colour: Red-white.

STUBAI cord spirit level with horizontal and vertical bubble

STUBAI cord spirit level with horizontal and vertical bubble 2

On sale!

Installation of gutter system

STUBAI cord spirit level with horizontal and vertical bubble

105535

€12.04

STUBAI cord spirit level with horizontal and vertical bubble

Roof folding tools

Forceps - 80 mm wide jaw

106872

€33.92

Forceps - 80 mm wide jaw. Nickel-plated steel for corrosion resistance. With an adjustable opening and a quick-release lever. With an adjustable opening and a quick-release lever.

Markers and angles

Batten gouge

10892

€18.24

Description The gauge is the ideal instrument for implementing the flight of large-scale roof coverings. For exact spacing of batten gouge up to 400 mm. The length of the gauge is 40 cm

ROSTEX Shears on the metal soldered - right

Sheet metal shears

ROSTEX Shears on the metal soldered - right

9924

€24.17

ROSTEX Shears on the metal soldered - right Length: 240 mm Weight: 0.50 kg Use for cutting tin to a thickness of 1,3 mm For cutting tin to a thickness of 1,3 mm

Roof folding tools

Clutch forceps - long jaw

106470

€16.69

Clutch forceps - long jaw

Bending tongs

Bending pliers for windowsills 100mm

105683

€115.83

Bending pliers for windowsills 100mm

Roof folding tools

Double Lock Seamer with nylon jaws

104990

€265.83

Information According to market requirements and the need to close the valve as sparingly as possible, especially for aluminium coatings, this type has emerged. The jaws are made of nylon and are interchangeable. The handrail is very strong and massive and will allow it to close without much effort. Jaw width 220mm, weight 2,3 kg.

Installation of gutter system

Cord spirit level

105115

€4.28

Very practical cord level, size 79 x 12 m

Sheet metal shears

ROSTEX Cut-out sheet metal shears

9917

€26.67

ROSTEX shears for cutting sheet metal up to 1.3 mm thick

Bending tongs

Bending pliers 90°, width 60 mm, 282251, Stubai

9695

€61.44

Special bending pliers with 90° angle, forged, with externally mounted joint, fritted and hard mouth, slightly rounded edges, plastic-coated handle, carbon steel, length 230 mm, width 60 mm

Sheet metal shears

ROSTEX sheet metal shears

9913

€34.92

Suitable for cutting sheet metal up to 1.3 mm thick, length: 300 mm, weight: 0.56 kg.

Markers and angles

Line aluminum plotter cord - W. 30 m

9670

€14.70

Grinder for the masons, self-decimation, single roll in the aluminium body, length: 30 meters.

Sheet metal shears

Shears spring 2323, 2324

104760

€1.59

Spare spring for the shears ROSTEX 2323, 2324, 2319

%product-name% Fasteners - length 22 cm %ean13%

%product-name% Fasteners - length 22 cm %ean13% 2

Roof folding tools

Curved Jaw Locking Pliers - length 22 cm

104249

€23.43

Basic information Fasteners - length 22 cm

Bending tongs

STUBAI Bending pliers 45° 60 mm STUBAI with groove

105539

€65.16

Bending tongs 45 ° 60 mm STUBAI with groove - two tools in one!

Sheet metal shears

Spring for tin snips

105397

€13.95

(€2.79/ks)

Spare spring for pliers 270011 and 270511. There are 5 pieces of springs in the pack.

Fallow shutters

Replacement axis for double lock seamer

10429

€6.95

Replacement axis for double lock seamer STUBAI

Round pliers with teeth 60 mm, length 260 mm

Flat, round and creping pliers

Round pliers with teeth 60 mm, length 260 mm

9815

€47.75

Special pliers with a rounded nose 60 mm long, forged, with a joint stored inside, excellent lever transfer, the nose guarantees perfect prying power and is hardened and slightly rounded, carbon steel, with teeth, length: 260 mm

On sale!

Fallow shutters

Stubai Double Lock Seamer

9698

€207.91

Closes the double lock seam. This tool is for the closing of an angle seam or first stage double seam into a double lock standing seam. Your hands never have to leave the tool when closing the seam and are also in a comfortable bending position. This results in maximum speed efficiency.

Sheet metal shears

STUBAI sheet metal shears

10032

€52.11

Alapvető információk A baloldali lemezolló egyenes vágásokhoz készült lemezekhez anyagdeformáció nélkül. Ezek az ollók alkalmasak hosszú és rövid vágásokhoz, fényes fejük magas ötvözésű szerszámacélból készült, műanyag bevonatú fogantyúval. Hossz: 350 mm Súly: 950 g

Sheet metal shears

STUBAI sheet metal shears- left

9679

€46.55

Basic information Special sheet metal shears for curved and long continuous cuts, shiny head made of high-alloy steel, hardened blade, plastic-coated handle, left-handed, length: 280 mm

Angle 80 cm with holes to mark the carpentry angle

Angle 80 cm with holes to mark the carpentry angle 2

On sale!

Markers and angles

Angle 80 cm with holes to mark the carpentry angle

103758

€17.49

The carpenter's horn has a scale on both sides and is therefore very practical and desirable.

Sheet metal shears

STUBAI sheet metal shears

9678

€46.55

Information Special sheet metal shears for curved and long continuous cuts, shiny head made of high-alloy steel, hardened blade, plastic-coated handle, right-handed, length: 280 mm

Bending tongs

PICCOLO bending pliers - straight, width 24 mm, length 185 mm

9915

€30.76

Forged, fully fritted and hardened, shiny carbon steel head, plastic-coated handle, slightly rounded edges, for small precision breaking and bending work, with externally mounted joint, length: 185 mm

Markers and angles

Stubai marking template

9674

€13.57

description Advantages compared over standard marking templates: – special stainless steel, polished, – hardeness of steel: 48 HRC – exact graduation every 5 mm from 5 to 100 mm, increasing – thickness of material 1,3 mm – no more bending – extended service time of Stainless steel special steel bead, sealant, polished, polished, exact 5 to 100 mm, 5 mm...

Plumbing tools

Micro set in roll-up bag STUBAI

00004

€234.01

S2739 Micro set in roll-up bag, 5 pcs. Supplied in roll-up bag.

Drazkovnice

Groove punch tool 10 mm

107601

€34.51

Groove punch tool 10 mm is forged from special steel, hardened and tempered, painted black.

Sheet metal shears

ROSTEX Spring for scissors 2325 and 2326

11366

€6.14

ROSTEX scissors spring 2325 - right 2325 scissor spring 2326 - left 2326

Logging tools

Holder for markingy crayon LYRA

107489

€13.48

Holder for markingy crayon LYRA

Sheet metal shears

ERDI metal shears, right

107421

€40.33

Information ERDI shears, right. ERDI shears, right. The blade is shorter than the shears at Stubai, which is an advantage. - Blade and handle in one piece - blade made of stainless steel - galvanized screws and nuts

Roof folding tools

Double Seaming Pliers

107412

€121.14

Stubai Double seaming pliers 30 mm. Double-phallus muscle tongs without the perfect hop for working in a nail knot

Bending tongs

STUBAI Corner seaming pliers

103493

€56.10

Basic information STUBAI Corner seaming pliers, depth is 65 mm, size 280 mm from the Austrian manufacturer.

Bending tongs

Bent pliers 90 ° 18 mm wide

107119

€66.78

Information ňBent pliers 90 ° 18 mm wide at 90 degrees.

Sheet metal shears

Circular shears - left 250 mm

104446

€26.88

Special shears for straight and curved cuts - straight, induction-hardened blade, Rockwell number: 58-60 HRC, Material: C60 carbon steel

Sheet metal shears

Circular shears - right 250 mm

11401

€26.88

Special shears for straight and curved cuts - straight, induction-hardened blade, Rockwell number: 58-60 HRC, Material: C60 carbon steel

Fallow shutters

Attica sheet closer Vario 3.0

105161

€324.39

The bolt cutters are for shutting down Attica. The advantage is that the height can be adjusted according to the edge sheet.

Bending tongs

Bending pliers, 180 mm beveled 45°

9730

€190.08

Information Bent forged bending pliers (45°) with a central joint, suitable especially for shaping cornices.

Roof folding tools

Stubai Seam Opening Pliers

9711

€41.50

Stubai Seam Opening Pliers Special pliers, forged, with lap joint, red plastic coated handle for fast opening of standing seams and double seams, upper jaw with induction-hardened blade, and lower jaw with prism.

Forged of special steel, prism height 25 mm
Material: tool steel %ean13%

On sale!
-20%

Drazkovnice

STUBAI Roofing seamer round

9809

€107.46 €134.33

Time left

Forged in special steel, height 25 mm, width 120 mm, weight 2 kg Forged of special steel, prism height 25 mm Material: tool steel

Flat, round and creping pliers

Flat pliers with teeth 50 mm, length 240 mm

104132

€33.43

Special pliers with a flat nose, forged, without teeth, beveled edges, polished mouth, with an externally mounted joint, plastic-coated handle, carbon steel, length: 240 mm

Insulated knife Stubai - blade length: 280 mm

On sale!

Markers and angles

Insulated knife Stubai - blade length: 280 mm

10381

€17.07

Insulated stainless steel knife, double-sided, ergonomic handle, blade thickness 2: Mm, blade length: 280 mm

Sheet metal shears

Mini Pelican Snip PVC-isolated

10009

€51.33

Basic informations Pelican pattern snips for long and straight cuts, induction-hardened blades. Sheet metal shears intended for straight cuts of sheet metal without material deformation. These shears suitable for sheet metal for long and short cuts, shiny head made of high alloy tool steel, plastic coated handle, Length: 245 mm Weight: 300 g

On sale!

Markers and angles

Stubai 5-piece knife set Tirol 756605

107514

€81.34

STUBAI Stubai 752905 5-piece Tirol knife set made of high-quality stainless steel

Markers and angles

Stubai Lady-Line Knife Set, Set of 5

105537

€81.34

Stubai Medium Stainless Steel Lady-Line Knife Set, Set of 5

Sheet metal shears

Shears on the sheet ERDI, left

107422

€40.33

Information Shears on the sheet ERDI, left

Tools for ironworkers

Sackdriller 113251

107445

€21.84

Sackdriller 113251

On sale!

Tools for carpenters and roofers

Wooden Shopper of Stubai

107181

€43.69

Stubai, a 330mm wooden mower, is the ideal tool for cutting wood and carpentry. It is made of high-quality hard steel with a wooden handle for greater comfort at work. Its length allows for accurate and straight cuts. It's perfect for the finishing touches.

Sheet metal shears

Circular shears curved right - 250 mm

9821

€58.20

Special shears for sheet metal - right, curved blade for circular cutting, shiny carbon steel head, hardened blade, right / left, length: 250 mm.

Markers and angles

Bow divider STUBAI 251003

9673

€31.72

With a knee and a clamping screw, plastic bag.

Sheet metal shears

ROSTEX shears with spring

105760

€19.08

Quality and authenticated RoSTEX shears with spring: Blade: 55 mm Length of shears: 250 mm

-20%

Bending tongs

Seaming pliers 180 mm

104228

€142.39 €177.98

Time left

Straight jaws, pliers bent (30°), with central connection, material: carbon steel C45, weight: 3 kg

Flat, round and creping pliers

KNIPEX Cobra 250

104956

€26.50

It combines the proven, safe click of the joint tap with an additional sliding function that facilitates work in very narrow and inaccessible spaces. The German company ensured that the product was of exceptional durability. The Knipex Cobra 250 jaws are made of tempered steel. Dentures have a hardness of about 61 HRC, which are resistant to wear and do...

Plastic and wooden hammers

Wooden hammer with metal hoop, Ø 60 mm

104766

€30.79

Wooden hammer with metal hoop, head additionally attached to the handle, unvarnished hand made of clay, nice to touch, head diameter 60 mm, weight 250 g

Fallow shutters

STUBAI Drip Edge Seamer 200 mm

9733

€188.77

Basic information This tool is used after the Stubai Drip Edge Bender in order to fully lock a sheet metal hem around a drip edge. It permits a clean and fast locking of the drip edge without any tool marks.

New product

Installation of gutter system

Pipe Expander Set 6D

10065

€730.89

Information The 6D Pipe Expander is the professional all-in-one solution for the job site. With a single device, you can expand all standard downpipes in six different diameters – quickly, effortlessly and reliably. The set is delivered in a robust, waterproof outdoor case, so you are always perfectly equipped.

New product

Bending tongs

Tinsmith’s seaming pliers ULTRA-VISION 45° 60 mm FREUND

10063

€80.49

These pliers are ideal for sheet metal workers, roofers, installers and craftsmen who work with sheet metal on a daily basis and demand precision, speed and reliability.

Roof folding tools

Folding pliers - 70 mm

107572

€35.52

(€35.52/)

To create any strand of the edge and swaging by 30 mm. You can also pipe crimp

Flat roof accessories

Universal shears 10"

107486

€26.59

Universal shears 10"

Bending tongs

Round seaming pliers 45°

10647

€43.41

Basic information Bent pliers 45 ° 18 mm wide at 45 degrees. They are an ideal alternative to Piccollo pliers

Sheet metal shears

ERDI Treated shears 180 mm left

107424

€24.17

ERDI Treated shears 180 mm left Extremely small forged heads have optimised disc geometry and are very skilful; Ideal for cutting small radii and confined spaces. The result of a compact design is the highest power with a minimum of effort. ERGO-handle for increased comfort and reduced fatigue arms!

Sheet metal shears

Shears on the sheet ERDI, left

107485

€30.80

Shears on the sheet ERDI, left

Bending tongs

Corner-width bending pliers 55 mm

107120

€89.52

Corner-width bending pliers 55 mm

Sheet metal shears

Circular shears for the cutting of beads - left

107121

€60.73

Circular shears to cut the bead - left. - for round cuts, rounded edges - Blade and handle in one piece - blades made of stainless steel

Fallow shutters

Replacement axis for WDF

106131

€26.67

Replacement axle for a double-flap bolt with a nylon jaw.

Sheet metal shears

ERDI metal shears, right

107484

€31.15

ERDI shears, right. The blade is shorter than the shears at Stubai, which is an advantage. - Blade and handle in one piece - blade made of stainless steel - galvanized screws and nuts

Roof folding tools

Drip Edge Seamer width 52 cm

106595

€550.41

Bending on the UNIBIEGER 260mm / 520mm drain.

Sheet metal shears

Converted shears Stubai - right

9686

€65.25

Shears on the sheet of Stubai - straight, guided, accurate and continuous straight cutting, rubberised handles, special steel.

Sheet metal shears

Translated shears Stubai - left

9687

€49.05

Shears on the sheet Stubai - left, guided, accurate and continuous straight cutting, rubberised handles, special steel.

Sheet metal shears

ROSTEX Sheet metal shears accompanied - left

105390

€24.17

ROSTEX metal shears gear 2326-left

Sheet metal shears

Circular shears curved to the right to cut the bead

107122

€60.73

Circular shears for cutting beams as an alternative to the Stubai scissors - for round cuts, rounded edges - Blade and handle in one piece - blades made of stainless steel

Saws and cutters

MASC Beaver Battery-operated channel carrier groove cutter - BIBER

106786

€1,291.67

Information Aka hook miller, 3,0 Ah, 36 V - BIBER so-called beaver

View

Markers and angles

carpenter pencil KOH-I-NOOR (2-packs)

106943

€2.56

2-colour pencil KOH-I-NOOR (2-packs) A carpenter's pencil combined with a red or blue crayon.

Roof folding tools

Locking Clamp - Shape C

106471

€39.35

Clamping forceps - Shape C

Bending tongs

Wide bending pliers 45 st, 60 mm

106333

€80.16

Pliers are used to handle soft materials, especially in cold months. For smoother and rounder bends, in particular when working with zinc, aluminium and copper materials.

Electric seam closing machine Freund Seaming Pro

Roof folding tools

Electric seam closing machine Freund Seaming Pro

106603

€2,658.54

Seaming PRO - double rebate shutter handle for cordless screwdriver

Roof folding tools

Schlebach Piccolo universal folding machine

107284

€5,125.00

Piccolo rebate closure, for rebate height 25 mm and 38 mm. Video Piccolo universal folding machine

Bending tongs

Heavy duty pliers

10500

€34.78

Heavy duty pliers

Roof folding tools

Stubai Double Seaming Pliers

104868

€120.92

Stubai Double seaming pliers 50 mm. Double-phallus muscle tongs without the perfect hop for working in a nail knot

Bending tongs

Hand-bent metal pliers

105880

€82.11

Hand-bent metal pliers Width 60 mm Range 7-20 mm

Installation of gutter system

STUBAI hacksaw

105534

€26.75

Quality hacksaw from STUBAI manufacturer

Sheet metal shears

Double-sided shears STUBAI

9693

€26.66

Double-sided shears STUBAI blade length 65 mm, length of shears 270 mm

Bending tongs

Bending pliers 45 ° with rubberized jaws

STUBAI

104690

€71.16

Bending pliers with rubberized jaws are used for gentle handling and work with painted sheets and materials.

Bending tongs

Bending pliers straight 60 mm with rubberized jaw

105067

€66.43

Bending pliers straight 60 mm with rubberized jaw

Fallow shutters

Replacement nylon jaw

105068

€54.17

Spare part for double-layered double-layered bolt with nylon jaws.

Fallow shutters

STUBAI Double seamer mini 100 mm

104773

€130.98

This tool is for the closing of an angle seam or first stage double seam into a double lock standing seam on straight or curved panels. Closes the double lock seam on straight and curved panels. Closing length: 100mm

Other OPP

Standing seam clamping device

103609

€199.21

Description Standing seam clamping device A ladder holder designed to catch on a shroud . Two clamp jaws with locking screw an hook. Material is aluminium and a towing capacity is 500 kg.

Installation of gutter system

Pliers for attaching hooks to gutters, length 305 mm, width 15 mm

104802

€54.72

Special forged pliers made of high-quality steel for various uses. Firstly: for shaping the web of hooks for gutters bending thanks to extended jaw width 15 mm length 305 mm plastic-coated handle forged steel

Reinforcement pliers with hammer function - asymmetric, length: 250 mm

Reinforcement tongs

Reinforcement pliers with hammer function - asymmetric, length: 250 mm

104652

€30.32

Special reinforcing pliers (asymmetric) with hammer function, better lever, special steel, hardened, hardened, shiny hardened head, plastic-coated handle, length: 250 mm, weight: 520 g.

Drazkovnice

Bending sleeve

STUBAI

9820

€70.45

Forged of special steel, tanned and hardened, black lacquer

Drazkovnice

STUBAI corner roofing seamer width 110 mm

104072

€164.60

Forged of special steel, cultured and hardened, coated with black paint, of a width of 110 mm, of a weight of 1,7 kg

On sale!

Drazkovnice

STUBAI Double sleeve, 140 mm wide

104559

€114.06

With smooth surface, 5-7 ° slant, hard steel prisms, height of prisms 25 + 35 mm, carbon steel, width 140 mm, weight 3,2 kg

Drazkovnice

Roofing seamer straight 140 mm

9808

€120.92

Forged of special steel, height 25 mm, forged and welded, width 140 mm, weight 2,3 kg

Sheet metal shears

PELIKAN - STUBAI sheet metal shears, length 350mm

9677

€47.75

Basic informations Sheet metal shears intended for straight cuts of sheet metal without material deformation. These shears suitable for sheet metal for long and short cuts, shiny head made of high alloy tool steel, plastic coated handle, Length: 350 mm Weight: 950 g

Sheet metal shears

Circular shears bent left - 250mm

9822

€58.20

Special sheet metal shears - left, curved blade for circular cut, polished carbon steel head, hardened blade, right/left, length: 250 mm.

Bending tongs

Bending pliers PICOLLO 45°, width 20 mm

9807

€32.97

Hardened forged with a 45° angle, plastic-coated handle, slightly rounded edges, length: 185 mm, width 20 mm plastic-coated handle, slightly rounded edges, length: 185 mm, width 20 mm

Bending tongs

Bending pliers - straight, length 350 mm, width 80 mm

9853

€86.91

Information Special bending pliers made of carbon steel, forged, fritted and hard mouth, slightly rounded edges, plastic coated handle, the sharpened angle of the mouth is mainly advantageous for bending corners, with a joint stored inside, length 350 mm, width 80 mm Video

Bending tongs

Bending pliers straight, length 270 mm, width 60 mm

9682

€49.93

Special bending pliers, straight, forged, with external joint, fritted and hard mouth, slightly rounded edges, plastic-coated handle, carbon steel, width 60 mm, length 270 mm

Bending tongs

Folding pliers - 45°, width 60 mm, length 250 mm STUBAI

9683

€53.13

Basic information Bending pliers with a 45° bend, external joint, forged, slightly rounded edges, plastic-coated handle, width 60 mm, length 250 mm

Fallow shutters

Drip edge seamer 250 mm

9832

€187.88

With this device, we form a clean bend without any residue and allow bending above 90 ° without leaving any traces, allowing a flat bend, bending round and bending the edges of the rims, 250 mm in length.

Fallow shutters

STUBAI clamp for standing joint 200 mm

9735

€186.19

Stubai’s Single Lock Hand Seamer is for the 90° first stage seaming process. Must be used prior to the second stage 180° seam is created. Constructed of steel shapes and tubing for extreme durability.

Installation of gutter system

STUBAI gutter bender, length 600 mm

9690

€115.91

Information Rotating head made of steel, easy adjustment of the bending angle with thread, length 600 mm.

Benders

Gutter bending Stubai, 800 mm

9684

€132.86

Information Rotating head of steel, simple twist and twist angle adjustment, length 800 mm.

Flat, round and creping pliers

Round pliers with teeth 45 mm, length 240 mm

9804

€32.68

Special pliers with a rounded nose, forged, with an externally mounted joint, excellent lever transfer, the nose guarantees perfect prying power and is hardened and slightly rounded, with teeth, carbon steel, length: 240 mm

Flat, round and creping pliers

Round pliers without teeth 45 mm, length 240 mm

9852

€40.87

Special pliers with a rounded nose, forged, with a joint stored inside, excellent lever transfer, the nose guarantees perfect prying power and is hardened and slightly rounded, carbon steel, with teeth, length: 240 mm

Markers and angles

Aluminium ruler

106494

€20.03

It's a scratch-proof aluminum ruler. Length 40 cm

Interchangeable hammer head SUPERCRAFT, 30mm

Plastové a drevené kladivká

Hammer head SUPERCRAFT, 30mm

105083

€6.33

Interchangeable hammer head SUPERCRAFT Ø 30mm

Showing 1-108 of 108 item(s)

Product added to compare.

Plumbing tools

Information

Business information

Store Information

Follow us

Payment options