Home

Výpredaj

Working shoes

Power tools

Building material

Hand tool

Plumbing machines

Sealing systems

Bentonite tape 20 x 15 mm

10028

€28.75

(€5.75/m)

Basic information It is used to seal joints in concrete against pressurized and non-pressurized water. It is resistant to light acids and bases. 1 roll = 5 meters

Reinforcement pliers KNIPEX 300 mm, Ø 25 mm Concreters Nippers KNIPEX 300 mm %ean13%

Reinforcement tongs

Concreters Nippers KNIPEX 300 mm

10998

€25.94

Information Reinforcement pliers of extremely thin shape for binding in problem areas that are difficult to access. Quick, reliable and efficient fastening and clicking of the wire in one. Up to 25% energy savings compared to conventional ticks. High-quality special-purpose steel, forged, tempered in oil, nickel-plated. The high damping in the tightening...

Roof folding tools

Stubai Seam Opening Pliers

9711

€41.50

Stubai Seam Opening Pliers Special pliers, forged, with lap joint, red plastic coated handle for fast opening of standing seams and double seams, upper jaw with induction-hardened blade, and lower jaw with prism.

Reinforcement pliers with hammer function - asymmetric, length: 250 mm

Reinforcement tongs

Reinforcement pliers with hammer function - asymmetric, length: 250 mm

104652

€30.32

Special reinforcing pliers (asymmetric) with hammer function, better lever, special steel, hardened, hardened, shiny hardened head, plastic-coated handle, length: 250 mm, weight: 520 g.

Drazkovnice

STUBAI corner roofing seamer width 110 mm

104072

€164.60

Forged of special steel, cultured and hardened, coated with black paint, of a width of 110 mm, of a weight of 1,7 kg

On sale!

Drazkovnice

STUBAI Double sleeve, 140 mm wide

104559

€114.06

With smooth surface, 5-7 ° slant, hard steel prisms, height of prisms 25 + 35 mm, carbon steel, width 140 mm, weight 3,2 kg

Drazkovnice

Roofing seamer straight 140 mm

9808

€120.92

Forged of special steel, height 25 mm, forged and welded, width 140 mm, weight 2,3 kg

PICARD carpenter's hammers

Carpenter's hammer - Picard 891 BlackGiant

105990

€38.51

"BlackGiant" mural hammer, American-shaped, with special curved nail, special handle with additional inner tube, serrated

Masonry tools

Serrated Blade Hammer - Picard 276

10060

€28.70

A jagged wall hammer with teeth on the blade. An ergonomic 2-piece hammer with reduced vibrations and a hardened protective ring for increased safety.

Sheet metal shears

EDMA SUPERCOUP NR3 - Bearing shears for corrugated sheet metal

10204

€36.45

Shears the following materials: - galvanized sheet 1.2 mm - Not cut 0.6 00 - Aluminium 2.0 mm - PVC 2.3 mm

Plastic and wooden hammers

Hammer Extended

103339

€32.92

A hammer with a serrated handle, which guarantees no injury, by virtue of the favourable angle of the hammer and the handle, guarantees that the metal will not be damaged.

MASC - Throat punch complete set 80, 100, 120 mm

Installation of gutter system

MASC - Special Expander Units for Downpipes set 80, 100, 120 mm

10232

€1,283.33

For expanding downspouts, creating a neck, trouble-free feeding of individual downspouts, for folded and welded downspouts, Set of heads 80/100/120 mm in a case.

Riveting tongs

GESIPA Handheld riveter NTX

104625

€63.26

Made of high-quality die-cast aluminum, jaws forged of chrome-vanadium steel. The narrow head of the forceps allows you to work in hard-to-reach places. The intermediate lever system reduces the expenditure of force during operation and absorbs the breaking of the rivet. Jaws are quick and easy to replace. In addition, the hand riveter has handy flange...

GESIPA Flipper - Accessory thread pliers

GESIPA Flipper - Accessory thread pliers 2

Riveting tongs

GESIPA Flipper - blind rivet hand tool

105283

€72.41

Information The blind rivet hand tool Flipper for perfect single-handed applications is a robust and stable riveting tool complete with a spent rivet mandrel container. Single-handed operation allows you to reduce the amount of force needed for riveting by around 40 per cent. In addition, the Flipper features an ergonomic design because the force...

Bending tongs

Bending pliers 90°, width 60 mm, 282251, Stubai

9695

€61.44

Special bending pliers with 90° angle, forged, with externally mounted joint, fritted and hard mouth, slightly rounded edges, plastic-coated handle, carbon steel, length 230 mm, width 60 mm

Leather belts and pockets

Belt buckle with carpenter theme - Picard 311c

9946

€8.29

Belt buckle with motive: Carpenters

Lever tongs

Lever piliers Parrot, 90 cm

103918

€126.51

Special lever piliers for cutting materials up to 44 HRC and Ø max. 9 mm, reinforced ergonomic handles, length 90 cm.

Lever tongs

Lever piliers STUBAI, lenght 780 mm

105582

€121.09

Lever piliers for cutting concrete steel of a diameter of 10 mm or less, slightly rounded edges, forged of special steel, metal rubber red handle, length 630 mm, weight 2,9 kg

Fallow shutters

Drip edge seamer 250 mm

9832

€187.88

With this device, we form a clean bend without any residue and allow bending above 90 ° without leaving any traces, allowing a flat bend, bending round and bending the edges of the rims, 250 mm in length.

Fallow shutters

STUBAI clamp for standing joint 200 mm

9735

€186.19

Stubai’s Single Lock Hand Seamer is for the 90° first stage seaming process. Must be used prior to the second stage 180° seam is created. Constructed of steel shapes and tubing for extreme durability.

Benders

Gutter bending Stubai, 800 mm

9684

€132.86

Information Rotating head of steel, simple twist and twist angle adjustment, length 800 mm.

Work shoes HECKEL

HECKEL MacCrossroad, half shoes – working shoes S3 CI

104297

€70.58

Safety shoes S3 CI HI HRO SRC, material: liquid-resistant full cowhide, sole: nitrile with deep and dense profile, resistant to oils, acids and chemicals, heat-resistant HRO, lining: highly breathable fabric, insole: anatomical, breathable, plastic toe + non-metallic puncture protection, 100% metal-free, ankle sprain system. Standard: EN ISO 20345:2011.

New product

Nibblers

Rotary Panel Cutter

€12.11

Description Get the Job Done Right with Rotary Panel Cutter. Purpose-built for professionals, this high-performance tool is the solution you need to cut ribbed roofing and wall panels with unmatched precision and ease. This model features dual opposing cutting wheels—designed to self-advance the tool smoothly through metal and vinyl material, leaving a...

Stylish shoes Elten

JORI Max BOA® low shoe S3

107509

€91.47

JORI Max BOA low shoes S3 Material: hydrophobic nubuck leather / textile lining: breathable textiles Safety: plastic tip, protection anti-puncture without metals Sole: PU / nitrile Sizes: 38 - 48 Special features: BOA®® Fit System

Showing 889-912 of 966 item(s)

Product added to compare.

Home

Bentonite tape 20 x 15 mm

Concreters Nippers KNIPEX 300 mm

Stubai Seam Opening Pliers

Reinforcement pliers with hammer function - asymmetric, length: 250 mm

STUBAI corner roofing seamer width 110 mm

STUBAI Double sleeve, 140 mm wide

Roofing seamer straight 140 mm

Carpenter's hammer - Picard 891 BlackGiant

Serrated Blade Hammer - Picard 276

EDMA SUPERCOUP NR3 - Bearing shears for corrugated sheet metal

Hammer Extended

MASC - Special Expander Units for Downpipes set 80, 100, 120 mm

GESIPA Handheld riveter NTX

GESIPA Flipper - blind rivet hand tool

Bending pliers 90°, width 60 mm, 282251, Stubai

Belt buckle with carpenter theme - Picard 311c

Lever piliers Parrot, 90 cm

Lever piliers STUBAI, lenght 780 mm

Drip edge seamer 250 mm

STUBAI clamp for standing joint 200 mm

Gutter bending Stubai, 800 mm

HECKEL MacCrossroad, half shoes – working shoes S3 CI

Rotary Panel Cutter

JORI Max BOA® low shoe S3

Home

Information

Business information

Store Information

Follow us

Payment options