Plumbing tools

Installation of gutter system

Roof folding tools

Fallow shutters

Bending tongs

Markers and angles

Flat, round and creping pliers

Plastic and wooden hammers

Drazkovnice

Sheet metal shears

Benders

Rolling benders

Extrusion guns

Pomôcky na ohýbanie

Knihy

Plastic and wooden hammers

Nylon hammer Base Ø 30 mm

107474

€28.00

A plastic Picard hammer with interchangeable warheads. Weight of hammer with handle: 370 grams. Handle: Ash wood. Length: 280 mm. Footwear has a width of 95 mm Diameter: 30 mm.

Installation of gutter system

MASC Special expanding cone for downpipes Ø 120 mm

11272

€549.00

Hrdlovačka slúži na rozšírenie hrdla dažďových zvodov. Pozor, neodporúčame na medené zvody!

Sheet metal shears

ERDI Treated shears 180 mm left

107424

€29.00

ERDI Treated shears 180 mm left Extremely small forged heads have optimised disc geometry and are very skilful; Ideal for cutting small radii and confined spaces. The result of a compact design is the highest power with a minimum of effort. ERGO-handle for increased comfort and reduced fatigue arms!

Sheet metal shears

Shears on the sheet ERDI, left

107422

€44.00

Shears on the sheet ERDI, left

Sheet metal shears

ERDI metal shears, right

107421

€44.00

ERDI shears, right. The blade is shorter than the shears at Stubai, which is an advantage. - Blade and handle in one piece - blade made of stainless steel - galvanized screws and nuts

Markers and angles

KINEX metre 5 m

105392

€6.90

KINEX 5 m is known from the time of Czechoslovakia and it gives you a pleasant feeling of nostalgia from past times.

Markers and angles

KINEX bending metre 13 mm x 3 m

9918

€6.60

KINEX elevation of 3 m is known from the time of Czechoslovakia and it gives you a pleasant feeling of nostalgia from past times. When pulling and pulling the tape, press the meter lever! That way you can guarantee a long life.

Roof folding tools

Metal folding pliers - 70 mm

104393

€176.00

(€176.00/)

To create any strand of the edge.

Roof folding tools

Double Seaming Pliers

107412

€119.00

Stubai Double seaming pliers 30 mm. Double-phallus muscle tongs without the perfect hop for working in a nail knot

Markers and angles

Marking pen for chimney production

107336

€19.00

Marking pen for chimney production

Square-headed and arched-headed Klampiara hammer

Square-headed and arched-headed Klampiara hammer 2

Kladivá PICARD

Double headed Plumbers Hammer

107086

€49.00

A squid hammer with a square and arched head. Made of alloy special steel Picard - carefully hardened and released. A head and a handle with a wedge clamp. Gently polished.

Náradie do lesa

Wire-mesh pliers - TOP GRAFER 20 / 200

106655

€69.00

Omega 20 - 200 x TOP GRAFER 20 / 22 green An easy and clever tool. 2 Installed 3 mm wire cutters. A magazine made of modified steel. Quick extraction of the magazine.

Templates for the production of rolled sheet metal

Templates for the production of rolled sheet metal 2

Pomôcky na ohýbanie

Hand woven handle for fabricating mechanical standing seams

106989

€59.00

Information The package contains one pair of the templates shown in the picture. You'll make cassettes for the lattice bars or the chimney's unraveling. A ruler for fabricating perfect 1″ mechanical standing seams on your brake is a system for quickly positioning sheet metal in a brake while fabricating 1″ standing seam panels – resulting in perfect...

Markers and angles

Plumbing angle 250 mm

106838

€37.20

A stainless-steel rectangle with a length scale and a graduated scale. Length 500 mm. Weight, 0,5 kg.

Accessories

Gutter saws Ø 100 mm

107410

€59.00

Roundabout to trough Ø 100 mm. You have to order too: Vykružovák do žľabu Ø 100 mm (marcus.sk)

Markers and angles

Batten gouge 50 cm

107365

€29.90

The gauge is the ideal instrument for implementing the flight of large-scale roof coverings. The distance between each flight is determined by a sliding pin and therefore the instrument does not have a numerical scale.

Pomôcky na ohýbanie

Freehand rollers

107364

€137.00

The profiling wheel is used to pre-mark the bend of the sheet metal for folding or for other purposes.

ELTEN ANDERSON LOOP - obuv pre pokrývačov S3

ELTEN ANDERSON LOOP - obuv pre pokrývačov S3 2

Stylish shoes Elten

ELTEN ANDERSON LOOP - shoes for roofers S3

107351

€89.90

light and comfortable shoes made of cowhide does not slide on the roof it does not write and does not leave black marks on the paper sewing uppers and laces from non-flammable NAMEX@ fibers lining made of high-quality leather steel tip puncture protection without the use of metal sole made of a GUMMI/PU combination, SKY type footwear resistant up to...

Sheet metal shears

Shears on the sheet ERDI, left

107485

€33.60

Shears on the sheet ERDI, left

Bending tongs

Bending pliers 200 mm beveled, length 570 mm

107311

€218.50

Bending pliers width 200 mm length 570 mm length of jaw 170 mm

View

Bending of trapezoidal sheets at drainage

Pomôcky na ohýbanie

Bending of trapezoidal sheets at drainage

107304

€357.00

Bending of trapezoidal sheets at drainage

Roof folding tools

FalzBender-Set roller

107291

€2,579.00

A set of roller bends designed to form bands of a sheet of rolled coating. The FALZBENDER is a perfect hand-held set of two benders for quick and effortless double-standing seam folding. The FALZBENDER is suitable for several materials - Stainless steel, Steel, Aluminum, Copper, and Zinc.

Roof folding tools

Schlebach Piccolo universal folding machine

107284

€6,150.00

Piccolo rebate closure, for rebate height 25 mm and 38 mm. Video Piccolo universal folding machine

Rolling benders

Hand bearing bending JOUANEL PLIMDC3-350

107280

€790.00

Two-column manual brackets, 3 guiding cylinders, which allow the formation of curves and bends of long lengths ranging from 5 mm to 350 mm depending on the model and up to an angle of maximum 100 °. Its broad sheathed handle ensures very good grip of the instrument and its 2 folding cylinders improve the upkeep of the sheet and the quality of bending in...

Showing 25-48 of 333 item(s)

Plumbing tools

Nylon hammer Base Ø 30 mm

MASC Special expanding cone for downpipes Ø 120 mm

ERDI Treated shears 180 mm left

Shears on the sheet ERDI, left

ERDI metal shears, right

KINEX metre 5 m

KINEX bending metre 13 mm x 3 m

Metal folding pliers - 70 mm

Double Seaming Pliers

Marking pen for chimney production

Double headed Plumbers Hammer

Wire-mesh pliers - TOP GRAFER 20 / 200

Hand woven handle for fabricating mechanical standing seams

Plumbing angle 250 mm

Gutter saws Ø 100 mm

Batten gouge 50 cm

Freehand rollers

ELTEN ANDERSON LOOP - shoes for roofers S3

Shears on the sheet ERDI, left

Bending pliers 200 mm beveled, length 570 mm

Bending of trapezoidal sheets at drainage

FalzBender-Set roller

Schlebach Piccolo universal folding machine

Hand bearing bending JOUANEL PLIMDC3-350

Home

Information

Business information

Store Information

Follow us

Payment options