Home

Výpredaj

Working shoes

Power tools

Building material

Hand tool

Plumbing machines

Black stripe on the sheet of paper JOUANEL

Markers and angles

Black stripe on the sheet of paper JOUANEL

106800

€3.33

Black stripe on the sheet of paper JOUANEL Black Description of width approx. 3 mm No cap

On sale!

Roof folding tools

Clamps pliers for welding

106727

€39.84

Soldering pliers for the welding of galvanized surfaces, for the temporary clamping of all forged parts

RET 5 Creping tongs, creping depth 30 mm

Flat, round and creping pliers

RET 5 Creping tongs, creping depth 30 mm

10206

€36.58

Crimping pliers are used for connecting and adjusting when installing rain gutters.

Plasterboard assembly tools

Multifunctional spatula

104598

€9.09

An 80 mm spatula with a stronger stainless steel blade and an anti-slip flexible handle,

JOUANEL - Clamp To Close The 1st Fold, Width 220 mm

On sale!
-15%

Roof folding tools

JOUANEL Double Lock Seamer

105456

€77.21 €90.83

JOUANEL - Clamp To Close The 1st Fold, Width 220 mm By leaving the tool engaged and by simple sliding less than a tool length, the traces of tightening are eliminated. The ergonomic positioning of the handles makes the use of this clamp particularly practical and does not cause any fatigue

Plasterboard assembly tools

Skimming spatula 650 mm 650 x 45 mm

105032

€13.74

Stainless steel taping knife Skimming spatula 650 mm 650 x 45 mm

Plasterboard assembly tools

DIMPLER PH2

105013

€15.49

S hĺbkovým dorazom a automatickou spojkou, spolu s Bitom PH2 vytvorí z každej vŕtačky skrutkovač vhodný pri montáži sadrokartónu, drevotriesky, izolačných dosiek ...

Line plotter cord - Signalling Wall, 30 m

Markers and angles

Chalk line reel with large handle 30 m

103731

€14.85

A metal body-mounted (plasticised), metal-coloured, branded "STEADER", a simple and rapid filling of the colour, a simple unwinding and winding of the cord, a blocking of the line by the closing of the handle, the construction and the weight make it possible to use the marking cord also as a pencil, a length of 30 m.

Installation of gutter system

Edge Unit 5 mm

103420

€96.75

Basic information 5 mm bends can be made with the bending machine.

Leather work belt with pockets JOUANEL 2

On sale!
-30%

Leather belts and pockets

Leather work belt with pockets JOUANEL

106158

€43.70 €62.42

Information Leather work belt with pockets JOUANEL

Plasterboard assembly tools

Hliníková doska na SDK 33 x 33 cm

106200

€34.47

Hliníková doska na SDK 33 x 33 cm Hmotnosť : 0,795 kg

On sale!

Tools for plasterers

Shears for for variable corners and angles

104137

€22.28

Information A quick, clean, meaningless cut. Suitable for cutting plastic profiles, decorative sheets, rubber and PVC bands.

Indwelling angle and cutter %product-name% %ean13%

Indwelling angle and cutter %product-name% %ean13% 2

Plasterboard assembly tools

Drywall scoring square

104560

€36.41

Allows for fast and clean cutting (max. 62 cm), a double measurement unit (inch / mm). Fast and clean cut. Max. 62 cm. Ideal to score and cut plasterboard. Compatible with all types of utility knife. Double measurement units : inch/mm.

Plasterboard assembly tools

Grinding grid for gypsum

105507

€5.17

280 x 93 mm, grain 150, pack: 5 x.

Soldering irons and accessories

copy of Tesniaci gel do falcu

106138

€15.00

Tesniaci gél do falcu. Balenie 1 liter. Použiteľné do falcov alebo na spoje plechov na streche.

Plasterboard assembly tools

Drywall tape holder

106939

€9.00

To hold and to dispense drywall tape. Can be hooked on belt. Quick opening design to replace tape easier.

Tools for carpenters and roofers

Delphin Carpet Knife

107095

€16.14

Tradesmen like carpet fitters will benefit from these 3 specialist knives to help them get the job done well. This product is supplied with just the handle and holster. Therefore, users can choose their own compatible blades for various jobs, which gives additional flexibility. Users can achieve precision cutting when working with carpet and vinyl. The...

On sale!
-15%

Leather belts and pockets

TOOL BAG JOUANEL

105124

€55.96 €65.84

A large-scale tool bag stores tools up to 15 kg. A flexible valve that completely covers the dry zipper and is coated with dry zippers over the entire length will protect your equipment from rain and dust on the construction site. The sliding window is intended to gain access to the transport sheet without opening the flap. This textile bag, highly...

Soldering irons and accessories

ZINNFIX tin-ammoniac stone in a can

105036

€15.84

ZINNFIX is a new kind of cleaning stone, whereby solder bits can be cleaned far quicker and without any effort required at all. And it produces no aggressive acidic fumes either… In addition to its cleaning agents, ZINNFIX is enriched with tin solder and copper additions so that cleaning the soldering iron is also pre-tin coating at the same time.

On sale!

Masonry tools

Tile lifter - Adjustable from 280 to 665 mm

104345

€41.89

Basic information Quick adjustment system. Ideal to easily carry tiles. Centered handle whatever the width of tile to carry. 35 KG Maximum carried load*

Plasterboard assembly tools

Finishing trowel

103921

€21.12

Basic information Finishing trowel, suitable for wiping the joints of the plasterboard, with a soft handle, for working with the plasterboard. Viac info o náradí na sadrokartón nájdete v BLOGU .

MAXI RET Creping tongs, creping depth 52 mm

MAXI RET Creping tongs, creping depth 52 mm 2

Flat, round and creping pliers

MAXI RET 5 blades effortless swaging tool

10205

€53.39

Information Swaging and Crimping pliers are used for connecting and adjusting when installing rain gutters. PATENTED TRANSMISSION. Easy handling!

Plasterboard assembly tools

Telescopic rod

107538

€17.42

EDMA Telescopic rod

Plasterboard assembly tools

Premium joint knives flexible blade 150 mm

106684

€10.91

Basic information Flexible blade of 15 cm. Premium joint knife. Single material, in stainless steel = more resistant. Mirror finish.Špachtľa je vyrobená z jedného kusu materiálu - nehrdzavejúcej ocele. Flexibilná čepeľ s dĺžkou 150 mm. Zrkadlové prevedenie s vysokou mierou pružnosti. Veľmi dobre čistenie po práci s tmelom.

Plasterboard assembly tools

Plastic mud pan - 250 mm

106909

€8.24

Basic information With galvanized steel blade to strike-off excess compound. Soft strap to easily hold the mud pan. 2 knife holders. Width 250 mm

Staplers and nailers

Sewing pins for the PUNCHER wedge

104599

€12.86

Sewing pins for the PUNCHER wedge. 5000 x

Soldering irons and accessories

Létovací cín 60 %

104217

€14.67

Létovací cín 60 %

Plasterboard assembly tools

EASY LOCK TELESCOPIC SANDER - Abrasive hand sander adaptable to a telescopic pole

106907

€35.75

Information Allows to sand walls and ceilings without using scaffolding or step ladder. Adjustable to a telescopic pole ref. 169955 (not included). You can order here

Plasterboard assembly tools

copy of Špachtľa nerezová na sadrokartón, 200/250/400/500/600/800 x 45 mm

105939

€12.81

Špachtľa nerezová na sadrokartón, 400 x 45 mm, s mäkkou rúčkou a otvormi na zavesenie.

Plasterboard assembly tools

EDMAPLIC - Drywall taper with corner roller

106638

€154.47

Basic information Allows easy and quick gluing of joint strips. Simultaneous application of tape and coating = time saving. Ergonomic handle and adjustable side strap for optimal grip. Toothed wheels for easy application. Built-in castor for gluing strips in corners, easily foldable. Filler flow is adjustable in 5 steps to apply the right amount of filler...

Markers and angles

Folding ruler 1250 mm

105879

€36.41

Adjustable angle, may be set to 0 ° to save space. Thickness 7 mm aluminium = light and durable, easily readable gauge in cm.

Plasterboard assembly tools

Quick support

105610

€27.41

Safety lock. To block equipments during transport. Extendable from 0.75 m to 1.25 m. 90° max. support : 60 kg. 65° max. support : 20 kg. Articulated top and bottom pads.

Plasterboard assembly tools

STUBAI Finishing Trowel

105509

€22.00

STUBAI Finishing Trowel Rozmer: 280 x 130 x 0,7 mm

Soldering irons and accessories

PERKEO Special Soft Soldering Kit

103401

€232.50

Basic information PERKEO soft soldering system in a complete set with propane assembly bottle for 0.425 kg filling (low version), constant regulator 1.5 bar including sintered metal filter to protect the soldering device from salting up, 2.5 m high-pressure hose up to 30 bar according to EN 16436-1 (DIN 4815) – DVGW-tested, indestructible high-performance...

Sheet metal shears

Shears SUPERCOUP NR1 for flat sheet

10203

€37.55

Shears the following materials: - galvanized sheet 1.2 mm - Not cut 0.6 00 - Aluminium 2.0 mm - PVC 2.3 mm

Plasterboard assembly tools

PREMIUM JOINT KNIFE 25 CM - FLEXIBLE BLADE

106683

€17.42

PREMIUM JOINT KNIFE 25 CM - FLEXIBLE BLADE Premium joint knife. Flexible blade of 25 cm. Single material, in stainless steel = more resistant. Mirror finish.

Plasterboard assembly tools

Board lever with steel stirrup FOOTPLAC

106827

€16.49

Information To lift panels for an accurate positionig thaks to its rocker system. Wide base for better balance. Ideal to unhinge doors. Extrawide loop suitable form most safety footwear.

Sheet metal shears

V-CUT cutting shears

106674

€78.86

V-CUT cutting shears, 30 degree cut

Roof folding tools

Spatula for ENCOLIT, large, 250 mm

106219

€17.42

A wooden handle. A varnished steel blade. A wooden frame with a hanging aperture. To glue the tiles together.

Plasterboard assembly tools

Špachtľa s bitom, 150 mm

104179

€13.94

Špachtľa s bitom vhodná pri práci so sadrokartónom, vysoko výkonná pre dokončovacie práce, leštená nerezová oceľ, s tvrdeným NR2 Phillips bitom, rýchle zamýkanie a odomýkanie bitu NR2 Phillips v rukoväti.

Markers and angles

Copying Preparation PVC

104104

€21.91

It is designed to mark copied contours. Suitable for carpenters, flooring, tiles or hobbies of masters.

Installation of gutter system

Cleaning blades for guttering

107153

€16.18

It's a scavenger shovel for scavenging sewers, it's a good tool for maintaining sewers.

Náradie do lesa

Omega buckles 20 - 200 x TOP GRAFER 20 / 22 green.

107439

€6.33

Omega buckles 20 - 200 x TOP GRAFER 20 / 22 green.

Plasterboard assembly tools

Stainless steel drywall spatula, 300 x 45 mm

105940

€13.54

Stainless steel drywall spatula, 300 x 45 mm, with a soft handle and hanging holes.

Soldering irons and accessories

Copper bits kinked 250g

104654

€0.00

Copper bits 250g Cold-hammered copper bits made of high-quality electrolytic copper - available in hammer form, cranked hammer form or point form - flat fixing pin prevents the bit from turning - long-lived - hammer form and cranked hammer form with 3 bores spaced at the bottom side for improving heat absorbation

Tools for carpenters and roofers

Delphin 100310 Carpet universal knife D2000 with holster blue

107094

€21.27

Basic information A professional tool for use on carpets, vinyl, bitumen, roofing felt, carpet, PVC flooring, PVC, polystyrene and insulation. The knife is supplied with a holster to clip on to belts or pockets. This is the world's most popular carpet fitters knife and features the following details - Easy opening, no screwdriver needed, great ergonomic...

Vodováha 90 CM so zárezmi na CW profily 2

On sale!

Plasterboard assembly tools

Level 120 CM with notches for CW profiles

105856

€90.75

Main information Magnet on the entire surface Level in the middle 3 slots, spacing 40 and 60 cm

Teleskopická podpera na montáž sadrokartónu

Plasterboard assembly tools

Quick support 160 - 290 cm

105426

€33.01

Information Safety lock. To hold plasterboard to the top. Extendable from 1.60 m to 2.90 m. 90° max. support : 50 kg. 65° max. support : 20 kg. Articulated top and bottom pads (20 x 6 cm).

Nož na hrany sadrokartónu kovový PROFI 2

On sale!

Plasterboard assembly tools

Nož na hrany sadrokartónu kovový PROFI

105017

€35.75

Markers and angles

Springer with a 5: 1 high-speed winding mechanism

104671

€19.51

A metal-bodied (plasticised) marker bracket with a marker paint "WRAPPER", a quick-reel mechanism in a 5: 1 ratio, a push-system, with teeth on the hook, the possibility of attaching the hook to the side of the buckle, with the buckle fastened to the buckle, a simple and rapid loading of the paint, a locking mechanism

Grip-Rite GRR11 A11 Heavy Duty Hammer Tacker

Tools for carpenters and roofers

Rapid R11 Heavy Duty Hammer Tacker

106244

€78.57

One-handed service. Simple assembly for all types of wood, wood chips, plywood. For a 6-10 mm flask. For the sewing of staple carpets, insulating materials, labels, etc. GRR11 is a complete steel structure and a quick release function that makes it very reliable and resilient.

Plasterboard assembly tools

Outside corner roller NO COAT

104632

€77.82

Pre utiahnutie pásky do vodorovných a zvislých vonkajších rohov. Vďaka 140 cm rukoväti je možné použiť valček pre výšku stropu do 3,5 m.

Markers and angles

Square 1250 mm

104811

€52.77

Basic information Shape-stable conduction, easily readable gauge in cm, of eloxidised aluminium.

Soldering irons and accessories

PERKEO HEXE – Propane Welding Torch

10055

€125.20

Information PERKEO HEXE is a powerful professional propane welding and preheating torch made in Germany, designed primarily for roofers, insulation contractors and construction professionals. Thanks to the patented PERKEO turbine effect, the working flame reaches temperatures above 1,500°C, ensuring fast and reliable performance when welding bituminous...

Soldering irons and accessories

PERKEO TITAN welding torch

10054

€195.93

Information TITAN DRACHENFLÜGEL high-performance propane welding torch - ULTRALIGHT thanks to titanium components - Extremely hot and powerful working flame with burning temperatures above 1,500°C thanks to the "PERKEO turbine effect" – Patented DRACHENFLÜGEL handle for significantly noticeable relief when holding the burner: The weight of the torch is...

Markers and angles

Marking pen for chimney production

107336

€17.85

Marking pen for chimney production

Náradie do lesa

Wire-mesh pliers - TOP GRAFER 20 / 200

106655

€63.26

Omega 20 - 200 x TOP GRAFER 20 / 22 green An easy and clever tool. 2 Installed 3 mm wire cutters. A magazine made of modified steel. Quick extraction of the magazine.

Plasterboard assembly tools

TRANSPLAC - Držiak na prenos sadrokartónu

107161

€14.58

Soldering irons and accessories

Redukcia na napĺňanie Perkeo

103408

€21.00

Japonská pílka, dĺžka pílového listu 30 cm

Japonská pílka, dĺžka pílového listu 30 cm 2

Tools for carpenters and roofers

Foldable saw

106688

€16.58

Japonská pílka, dĺžka pílového listu 30 cm

Pomôcky na ohýbanie

T-bar for rounding 36 cm Ø 13 mm

106541

€82.50

Information Manual winding of the actuators Ø 13 mm, specially designed for zinc works, is a solution for the manual lining of small zinc parts. By means of a 13 mm diameter rod system with which our rods are equipped, this rod will allow you to manually line the sides of the sill or any small piece of metal. T-bar for rounding 36 cm Ø 13 mm

Polystyrene cutter

30 mm groove cutter for hot knife

105858

€37.42

30 mm groove cutter for hot knife

Polystyrene cutter

Blind hole cutter for hot knife

105857

€35.75

Maxi. 70 mm depth.Mini. 25 mm depth. Ideal for electrical box.

Roof folding tools

Spatula for ENCOLIT, small, 80 mm

106218

€12.42

Špachtľa pre ENKOLIT, mSpatula for ENCOLIT, small, 80 mmalá, 80 mm

Plasterboard assembly tools

Rotačné nožnice na sadrokartón 150 mm

107073

€41.59

Vhodné na zrezanie dosiek s poškodenými a znečistenými rohmi z dôvodu nesprávnej manipulácie.Na rezanie sadrokartónových pásov šírky 150 mm.Kolieska z nehrdzavejúcej ocele.Hrúbka do 18 mm, s vodiacou rukoväťou.Prispôsobenie výšky a šírky sadrokartónového panelu.

Sheet metal shears

Shears PELIKAN left

105855

€44.92

Shears PELIKAN left Length of scissors 300 mm 62 mm blade Calcification 56 HRC

Plasterboard assembly tools

CLEAN SANDER - Pole sander adaptable on vacuum cleaner

103949

€40.31

CLEAN SANDER - Pole sander adaptable on vacuum cleaner

Plasterboard assembly tools

Inside corner roller NO COAT

103875

€90.76

Pre utiahnutie pásky do vodorovných a zvislých vnútorných rohov. Vďaka 140 cm rukoväti je možné použiť valček pre výšku stropu do 3,5 m. Hmotnosť: 0,916 kg.

Soldering irons and accessories

Acid containers, including salmiacs

105015

€14.17

The acid container also contains a brush and a salmiak of size 65x45x20 mm It is possible to order it separately.

Staplers and nailers

Tacker PUNCHER

10208

€42.91

Puncher the Kid is used to fix the fouls with the pick-ups. The capacity of the boxes is 175.

Plasterboard assembly tools

ERGOTOP - Section setting pliers for all types of studs and tracks

10202

€71.70

Kliešte na spájanie C a U profilov. Možné spájať profily hrúbky 1 + 1 mm.

New product

Plumbing workshop equipment

Coil unwinder 1 000 mm

€3,870.00

Information Cantilever coil unwinder, coil width 1,000 mm. Easy to handle, space-saving. Manual coil brake and winder on the same side.

New product

Plumbing workshop equipment

Konzolový odvíjač zvitkov šírka 1 250 mm

106666

€3,048.78

Plumbing machines

Light profiling machine for standing seam Compact pro

€12,333.33

Information Electric roll-forming machine for building site or workshop, reference PROBAC-CPRO, ultralight and removable, for shaping of standing seam trays, directly on building site. Its quick dismantling system of blocks without tool provides easy transport and handling (Extra roll-forming unit for making cleat roofing trays: see optional complementary...

Plumbing workshop equipment

Beading accessory with a stick Ø 14 - 16 - 18 mm , length 2 m

10043

€706.51

3-position aluminium geared-down beading accessory with 14, 16 or 18mm Ø stick (Ø to specify at the order), reference ABAL2040V, 0.65mm zinc capacity for a 14mm Ø stick and 0.80mm for a 16 and 18mm Ø stick. Gear reduction system to make very regular beads without effort. Used with the PVX folding machines

Soldering irons and accessories

Propane branding iron holder

10031

€99.00

Perkeo Propane Branding Iron Holder Dimensions: 108 x 21 x 81 mm PROPANE - Equipment, Systems, and Tools Branding Iron PERKEO Propane Branding Iron Holder For optimal mounting of the engraving plate - M14x1 RH inlet Zur optimalen Befestigung der Gravurplatte– Eingang M14x1 R

Soldering irons and accessories

copy of PERKEO Special Soft Soldering Kit

106892

€153.66

Longer hours, lower gas consumption, shorter heating times.

Tongs

Toggle joint hand riveter pivoting head 360°

9923

€50.40

Toggle joint hand riveter, pivoting head 360°

Fallow shutters

UniBieger T XL ohýbanie 35 mm

107599

€615.45

Unibieger

On sale!

Značítka a uholníky

Chalk line reel with large handle

107573

€40.61

Basic information For long distance marking. Built-in filter system to prevent excess chalk. Rope diameter : 2,5 mm (braided). Capacity : 300 g.

Roof folding tools

Light seamer for standing seam profiles

107571

€2,075.00

Information Light seamer reference SRLT2 for standing seam profiles, first and second fold in one pass on roofs and first fold on facades. 25, 32 and 38mm height, with base for screwdriver and stackable transport case. Light seamer for standing seam profiles height 25 or 32mm - 1st and 2nd fold

Plumbing machines

Light profiling machine for standing seam Compact pro

107556

€12,333.33

Značítka a uholníky

Special chalk line reel for roofers

107551

€29.61

Information Chalk line reel with two handles. To reduce movement on the roof. Rope diameter : 1,5 mm (braided). Capacity : 2 x 100 g. Built-in filter system to prevent excess chalk.

Plasterboard assembly tools

Professional Series plaster tools set

107543

€218.70

Professional Series plaster tools set 6400

Plumbing workshop equipment

Decoiler 670 mm

107541

€2,175.00

Information roll width 670 nm maximum load 1000 kg

Sheet metal benders for the workshop

JOUANEL PCX1020

106144

€2,158.33

Construction bending machine JOUANEL PCX1020

Plumbing workshop equipment

JOUANEL shears for sheet metal cutting w. 1000 mm

107540

€2,788.33

Information The CT1000 light cutting system is very effective thanks to its versatility of use and set-up. Whether on site or in the workshop, installed on a pallet, workbench or table trolley, this lightweight cutting unit lets you quickly cut sheets up to 1 m wide from a coil. Its two lift handles, compact size and low weight make transport as easy as...

Plasterboard assembly tools

EDMAPLAC CABLE - plasterboard lift

107527

€455.28

360° free rotating head. Lifts the plasterboard in horizontal and angled position. Double cable for lifting and lowering = safety. Ball bearing pulleys for less effort. Winch with bi-material handle. Ergonomic tilting handle for easy loading of the plasterboard. Smaller size, lighter, less bulky. Easy door passage thanks to its folding side feet. Equipped...

CNC sheet metal forming machines

JOUANEL MLC1250 - compact cutting line

106702

€39,000.00

Basic information Jouanel MLC1250 - sheet metal splitter is a high-performance sheet metal splitter with cnc control. It is possible to deliver the device also with a sheet leveler

Plumbing machines

JOUANEL PROBAC-LT Electric profiling machine

107413

€11,130.08

JOUANEL Light profiling machine for standing groove with transverse cutting from the French manufacturer JOUANEL, suitable for the workshop or construction site. Thanks to the folding entry guides and handling arms, this machine is perfectly suited for work on the construction site

Sheet metal benders for the workshop

Segment bender PCX1020T 1.02 m

107496

€4,150.00

JOUANEL Segment bender PCX1020T 1.02 m

On sale!

Plasterboard assembly tools

Spoon, rounded

104456

€11.00

Rounded spoon. A blade with a radius of 13 cm and a width of 16,5 cm suitable for large buckets of paint. Ideal for filling the EDMAPLIC coupling tape retractor. A two-material handle with a metal head.

Roof folding tools

Metal folding pliers - 70 mm

104393

€146.67

(€146.67/)

To create any strand of the edge.

Plumbing workshop equipment

Roll decoiler 1250 mm

105284

€1,979.67

JOUANEL roll width 1250 nm maximum load 1000 kg

Sheet metal benders for the workshop

JOUANEL PVXT - segmented bending machine 2,00 m

107406

€7,614.17

JOUANEL segmented bending machine 2,00 m

Plumbing machines

JOUANEL CGM 3080 - scissors width 3,00 m

107408

€8,314.17

JOUANEL CGM 3080 - scissors width 3,00 m A number of accessories can be supplied to the machine. The price shown is only for the scissors without accessories

Plumbing workshop equipment

Chimney pattern table JOUANEL

107414

€3,796.75

Information Chimney pattern table reference GAB1350-PLUS for the realization of stapled chimney abutments up to 1320 mm width, supplied with 0°,20°,25° and 30° angle template tools (other models of angle template tools available in the optional additional equipment) Realize your various stapled chimney abutments on a single machine! This adjustable...

Sheet metal benders for the workshop

Segment bending machine JOUANEL HS23 - 1000 mm

106157

€4,158.33

JOUANEL Manual sheet metal bender for the workshop Bends sheet metal to a thickness of: steel 1.5 mm, stainless steel 1.0 mm, aluminum 2.0 mm

CNC sheet metal forming machines

CNC bending machine 3,0 m – JOUANEL PTS3050-10

107409

€31,366.67

JOUANEL Electric bending machine with CNC control. panel and el. rear stop Excellent bending properties Working width: 3050 mm, weight: 1600 kg, power: 1.75 kW, sheet bending: steel sheet 1.2 mm, bending angle: 135°/160° (at 0.5 mm) clamp opening: 30 mm , dimensions: 3705 x 620 x 1190 mm.

View

Elektrická gilotína 4,08m CGI4080-BAE CNC JOUANEL

Elektrická gilotína 4,08m CGI4080-BAE CNC JOUANEL 2

CNC sheet metal forming machines

Electric guillotine 3,08m CGI3080-BAE CNC JOUANEL

107612

€25,900.00

JOUANEL Electric guillotine shears for workshop cutting length 3 m steel width 1.2mm controlled by touch control with 7" screen belt electric backstop from 19 to 750mm square gauges and folding front plate.

View

Plumbing workshop equipment

Roll decoiler 5 tons 1250 mm

106601

€3,200.83

JOUANEL Roll decoiler 5 tons width 1250 nm

Soldering irons and accessories

Copper bits pointy 250g

105037

€26.67

(€26.67/)

Copper bits pointy 250g Cold-hammered copper bits made of high-quality electrolytic copper - available in hammer form, cranked hammer form or point form - flat fixing pin prevents the bit from turning - long-lived - hammer form and cranked hammer form with 3 bores spaced at the bottom side for improving heat absorbation

Plumbing workshop equipment

Manual cylindrical rounding machine SDS48M

107319

€2,375.00

JOUANEL Manual cylindrical rounding machine SDS48M width 1,00 m

Plumbing workshop equipment

Swaging machine JOUANEL SB5M-PLUS

107317

€1,575.00

JOUANEL Sheet metal signer

Bending tongs

Bending pliers 200 mm beveled, length 570 mm

107311

€177.64

Bending pliers width 200 mm length 570 mm length of jaw 170 mm

Plumbing workshop equipment

Stand for unwinding two rolls

107283

€2,512.20

JOUANEL width 1000 mm weight 1,200 kg

Plumbing workshop equipment

Lightweight aluminum coil unwinder DVM500

107282

€592.68

JOUANEL Unwinder for rolls with a width of 0.5 m to 1.25 m

Plumbing workshop equipment

Lever board shears JOUANEL CL1020-15C

107281

€2,908.33

JOUANEL length 1020 mm weight 380 kg height 780 mm

Rolling benders

Hand bearing bending JOUANEL PLIMDC3-350

107280

€658.33

Two-column manual brackets, 3 guiding cylinders, which allow the formation of curves and bends of long lengths ranging from 5 mm to 350 mm depending on the model and up to an angle of maximum 100 °. Its broad sheathed handle ensures very good grip of the instrument and its 2 folding cylinders improve the upkeep of the sheet and the quality of bending in...

Plumbing machines

Standing seam roll-forming machine PROBAC-HTEC

107268

€29,666.67

Information Electric roll-forming machine for workshop, reference PROBAC-HTEC for the production of standing seam profiles in parallel or conical trays. Check of the machine by latest evolution of digital control with 10'' touch screen. Full or partial electric transversal cut and automatic cycle to produce several trays without intervention, longitudinal...

Plumbing machines

PROBAC-HT-CE Standing seam roll-forming machine

106873

€24,144.17

PROBAC-HT-CE Standing seam roll-forming machine

Tools for carpenters and roofers

Slate ripper 600 mm Eternit

104257

€37.49

Information Traditional slate ripper Slingshot, 600 mm Eternit. Forged steel for a better fortress. The slate must be reworked and removed.

On sale!

Plasterboard assembly tools

Stand for EDMALIGHT

107163

€81.60

Main information Minimum height: 1.08 m Maximum height: 2.80 m Folding legs, material steel The set includes an adapter for EDMALIGHT connection Compatible with any product with M8 thread

Plasterboard assembly tools

áno

107162

€164.09

JOUANEL - Large Handkerchief Wedge Pliers, Depth 250 mm

Roof folding tools

JOUANEL - Large Handkerchief Wedge Pliers, Depth 250 mm

105156

€290.84

Information JOUANEL - Large Handkerchief Wedge Pliers, Depth 250 mm. The treatment of singular points such as angles require special attention to avoid sealing problems. This large model clamp available in working depth of 250 mm will be very practical to precisely achieve the angle connection of the raised edges without cutting or welding.

Nibblers

FALZ CUTTER

107061

€1,080.83

The Falz Cutter can be located in any double-locked area with a standing seam, which allows not only to remove the connecting points of the roof but also to cut the surface for various types of needs, such as ventilation shafts and roof windows.

Plumbing workshop equipment

Cantilever coil unwinder, coil width 1,000 mm

106921

€5,450.41

Information Cantilever coil unwinder, coil width 1,000 mm, Easy to move, Space-savingManual coil brake and crank on the same side

The new drip edge bender UNIBIEGER 260mm / 420mm

The new drip edge bender UNIBIEGER 260mm / 420mm 2

Fallow shutters

The new drip edge bender UNIBIEGER 420mm

106594

€568.29

Basic information The new drip edge bender UNIBIEGER 420mm

Roof folding tools

FLITZER Seamin machine Schlebach

105758

€4,575.00

Information The universal seaming machine FLITZER is used to produce angular and double standing seams in a single operation, for straight profile shapes. Requirement is that the pre-profiled shapes are produced on a Schlebach profiling machine. The machine is used for a seam profile height of 25 mm FLITZER rebate shutter, for groove height 25 mm,...

Polystyrene cutter

Polystyrene cutter, suitable for making holes in polystyrene

107230

€154.92

Clean cut without polystyrene beads projection on styrofoam panel (E.P.S. and X.P.S.).Effortless cutting without any dust.Blade length : 200 mm.Power : 190 W.CE certified.Supplied with a plastic case including a 200 mm blade, a metallic brush and a fixing key.

Vysekávanie a dierovanie do plechu

Workbench corner notcher

ENC150-15

€825.00

Information Workbench hand corner notcher, reference ENC-150-15, 1.5mm steel capacity, cutting angle 90 °, maximum notching 150mm, graduated adjustable gauge Manual punch with corner plate steel up to 1.5 mm thick, cutting angle 90 °, maximum notch 150 mm, adjustable stop.

Vysekávanie a dierovanie do plechu

Swaging machine JOUANEL SEMI-PLUS

106241

€1,056.10

Information Manual signature, steel ø 0.8 mm Model equipped with double platform, worktop support and scaffolding support. Video

Pomôcky na ohýbanie

CMB-ET Inflatations

106189

€665.00

CMB-ET Inflatations

%product-name% Chimney stencil for chimney sweeping

%product-name% Chimney stencil for chimney sweeping 2

Plumbing workshop equipment

Chimney pattern table Kaminschablone

106492

€2,241.67

Information The price includes chimney formation in the range of 20-30 degrees, others are preparatory (in the picture are the light grey ones)

Stabilák pre montáž stien montovaných domov

Stabilák pre montáž stien montovaných domov 2

Plasterboard assembly tools

Wall assembly support 1.600 - 4.200 mm

107563

€260.20

Basic details adjustable from 1,600 - 4,200 mm 3-part, galvanized Absorption of compressive and tensile forces low weight of 12 kg Can also be used as a pull rod Supporting force up to max. 22 kN with pivoting lever for fine adjustment via left/right thread

Soldering irons and accessories

Copper bits 250g

105038

€21.00

Plasterboard assembly tools

Nastaviteľné chodúle

106199

€287.84

Hliníkové nastaviteľné chodúle sú ľahké a praktické. Ponúkajú úsporu času pre všetky výškové práce. Kĺbové chrániče nôh umožňujú prirodzenú chôdzu, 2 podložky pre lepšie vyváženie. Nové remienky s kovovou sponou pre lepšiu stabilitu.Nastaviteľné od 45 do 76 cmMaximálna nosná hmotnosť : 102 kgVáha : 7730 g

Plumbing machines

Electric profiling machine JOUANEL PROBAC-LT-C

105024

€14,895.83

Stojan na zvitky s odvíjaním stohovateľný - 1,25m DVS1250E JOUANEL

Stojan na zvitky s odvíjaním stohovateľný - 1,25m DVS1250E JOUANEL 2

Plumbing workshop equipment

Roll stand with decoiling - 1,25 m DVS1250E

105026

€2,124.17

JOUANEL Stackable racks (maximum 3 racks), for coils with a width of 1250 mm maximum load 1000 kg To optimize spool storage and handling Each of them is equipped with a hub for manually expanding mandrels, with a diameter of 285 to 540 mm With brake and rewinding device.

Zakružovačka falcovaného plechu RCBPRO JOUANEL

Zakružovačka falcovaného plechu RCBPRO JOUANEL 2

Plumbing machines

Rounding machine for folded sheet metal RCBPRO JOUANEL

RCBPRO

€14,870.00

JOUANEL Crimping machine for folded sheet metal, capacity 0.8 mm, with variable speed drive for precise bend adjustment Control with a pedal and a button to keep your hands free to hold the sheet Move forward / backward, ad hoc or continuously.

View

CNC sheet metal forming machines

Electric guillotine 4,08m CGI4080-BAE CNC JOUANEL

106525

€30,081.30

JOUANEL Electric guillotine shears for workshop cutting length 4m steel width 1.2mm controlled by touch control with 7" screen, belt electric backstop from 19 to 750mm, square gauges and folding front plate.

CNC sheet metal forming machines

CLD-AE-REF JOUANEL light electric cutting lines cld

106064

€19,390.24

Basic information JOUANEL Electric cutting line, reference CLD-AE-CTE-REF, useful cutting width 1.25m, 0.7mm steel capacity, uncoiling and electric cut, slitting function with 3 sets of adjustable blades, equipped with a numerical control with touch screen 7" Designed for a coil width of 1.25 m Longitudinal division of 3 strips with integrated transverse...

Plumbing machines

CLD-AE-CTE JOUANEL Light semi-electric cutting lines

106697

€13,808.94

Information Light semi-electric cutting line, reference CLD-AE, useful cutting width 1.25m, 0.7mm steel capacity, electric uncoiling, length measurement, manual cut by integrated roller shear

View

Rolling benders

Rolling of sheet - production of sheets

105123

€161.79

Information Bending device and you can bend the sheet from a bending of 135 ° to a bending of 180 ° or you can bend it without bending back to save your bending

Signovačka na plech elektrická JOUANEL typ SB5VV

Signovačka na plech elektrická JOUANEL typ SB5VV 2

Vysekávanie a dierovanie do plechu

Electric JOUANEL swaging machine type SB5VV

106402

€2,741.67

JOUANEL electric sheet metal signer type SB5VV

Segmentová ohýbačka JOUANEL HSS33 - 1270 mm

Segmentová ohýbačka JOUANEL HSS33 - 1270 mm 2

Sheet metal benders for the workshop

Segment bending machine JOUANEL HS33 - 1270 mm

105851

€5,682.93

Information Manual sheet metal bender for the workshop Bends sheet metal to a thickness of: steel 1.5 mm, stainless steel 1.0 mm, aluminum 2.0 mm.

Tools for carpenters and roofers

Pákové nožnice PRO MAT COUP 210 mm

104102

€58.80

Pákové nožnice PRO MAT COUP 210 mm

Mobilná klampiarska ohýbačka plechu z hliníku JOUANEL - hmotnosť 80 kg

Mobilná klampiarska ohýbačka plechu z hliníku JOUANEL - hmotnosť 80 kg 2

Sheet metal benders for the workshop

Aluminium manual folding machine JOUANEL - weight 80 kg

106121

€3,639.17

JOUANEL Mobile aluminum wire bender - weight 80 kg Rotary scissors are not included in the price!

ACCU SEAMER - rebate shutter handle for cordless screwdriver

Roof folding tools

ACCU SEAMER - rebate shutter handle for cordless screwdriver

105848

€1,656.10

ACCU SEAMER - double rebate shutter handle for cordless screwdriver The Falz Seamer II STEPS is the perfect hand-held tool for effortless seaming of both single and double lock roof panels.

Držiaky na montáž dosiek CETRIS PLANK alebo HARDIE PLANK

Držiaky na montáž dosiek CETRIS PLANK alebo HARDIE PLANK 2

Tools for carpenters and roofers

CLIN FIX ® - Set of 2 cladding supports

105543

€81.59

Určené pre nasledovné dosky 180 mm Hardie Plank type190 mm Cedral type210 mm Duracolor or Hardie Linea type225 mm Ced’R-Tex type 200 mm CETRIS Cena je uvedená za pár držiakov! To install overlap claddings (fiber cement, fiber wood or wood) by 1 person alone. Allows to hold planks in position before nailing with overlap of 30 mm. For all claddings from 6...

Flexible ladder - rolled-up rubber steps

Other OPP

Flexible ladder - rolled-up rubber steps

105166

€397.56

Dimension of the ladder: Length 1,60 m Width: 0.40 m Height of degree: 73 mm Range of degrees: 250 mm

Sheet metal benders for the workshop

Construction bending machine JOUANEL PCX3080A

106584

€7,750.00

JOUANEL Working width: 3,080 mm, weight: 350 kg sheet bending: steel sheet 0.8 mm, zinc 1 mm, bending angle: up to 180° (at 0.8 mm) clamp opening: 80 mm, dimensions: 3650 x 1060 x 650 mm.

Plumbing workshop equipment

Table for transverse sheet metal cutting JOUANEL CLD-LT

106771

€3,800.00

JOUANEL CLD-LT sheet metal cross cutting table for fast and comfortable long cuts of zinc, stainless steel or steel without deformation and without effort It can be used in various industries, especially in tinsmithing and roofing work These manual or electric cutting machines from the French manufacturer guarantee safe and comfortable work

JOUANEL PROBAC CPRO - Electric profiling machine

Plumbing machines

JOUANEL PROBAC CPRO - Electric profiling machine

104982

€10,972.00

JOUANEL Maximum width: 800 mm, min. width: 260 mm and 140 mm, max. thickness: steel sheet 0.65 mm, zinc / copper / aluminum 0.7 mm, dimensions: 1200 x 1400 x 560 mm Power supply: 220 V, power: 1.1 kW, bending speed: 9 m / mn, emergency stop system.

Sheet metal benders for the workshop

Manual folding machine JOUANEL PCX2040A

105125

€3,080.49

Basic information Manual folding machine for building site or workshop, reference PCX2040A, useful folding length 2m, 1.0mm zinc capacity - 0.7mm S235JR steel capacity, with removable feet, 15mm narrow folding beam, quick locking of the clamp by eccentric, angle gauge Working width: 2,040 mm, weight: 160 kg sheet bending: sheet steel 0.8 mm, zinc 1...

Fallow shutters

Steel bending jaws 300 mm

104578

€332.50

A bending device replacing the standard bending device in the workshop. This tool makes one bend endless band tin quick and accurate at the jobsite. Without difficulty leakproof and weldless gutters, ducts, high wallsheating, wallconnections etc. are constructed. Video

Plumbing workshop equipment

Decoilers on wheels DVS

104491

€2,123.58

Information A wheeled coil reel from French manufacturer Jouanel Industrie is a robust and reliable piece of equipment designed for unwinding sheet metal coils and strip materials in construction and industry. Thanks to its heavy-duty construction and practical design, it ensures safe and comfortable handling of heavy coils.

Plumbing workshop equipment

Extensible roller table TRX

105028

€415.45

Infomation Extensible roller table, reference TRX. Suitable for roll-forming and bending of standing seam trays and cleats, it provides a flatness at the machine exit. For working with long length, possibility to attach them to each other 9 cylinders with a diameter of 42 mm. Maximum load 150 kg. Total weight: 42 kg

Floor mounting tools

EDMA na laminátové parkety - MEGA STRATICUT 400

104375

€94.23

Možná šírka rezu až 400 mm. Možné rezy podlahy do hrúbky 15 mm. Hlavnou výhodou je bezprašné a nehlučné rezanie laminátovej podlahy. Odnímateľný doraz pre uhlové rezy.

Masonry tools

Náhradný drôt k rezačke polystyrénu, 1370 mm

104139

€10.96

Plasterboard assembly tools

STUD CUTTER - Guillotine for metal studs 60 mm

105190

€144.98

Allows to quickly cut without burr 60 mm studs and tracks, corner beads, ceiling suspension system

Plasterboard assembly tools

PROFILCUT® MEGA - Guillotine for metal profiles up to 100 mm wide

105189

€347.89

Gilotína na strihanie profilov do šírky 125 mm a výšky 60 mm. Beznámahové strihanie bez vzniku drsných okrajov.

Plumbing workshop equipment

Roll cart - 1000 mm

104981

€511.38

For loading, transporting and unwinding coils till width of 1 000 mm. Easy and convenient scrolling. Capacity - 250 kg. Weight - 26 kg

Tools for carpenters and roofers

Kovadlinka na veľký formát

105113

€33.01

Tools for carpenters and roofers

Kovadlinka

105110

€118.80

Plasterboard assembly tools

Hand Sander

105529

€10.74

Information Drywall Hand Sander. With an arc handle, rubber underside, with two clips for gripping the grinding grid.

Tools for carpenters and roofers

MAT 2 with punch - cutting ETERNIT

103756

€79.19

For splitting natural slate, eternite, everite.

Tools for carpenters and roofers

MAT COUP 2 - Eternit and slate shears

11220

€42.65

Shears designed to divide Ethernit and slate. A dust-free cut without damage to the covering. Possible to cut 7 mm thick material

MASTERPROFILE - Riveting connection of C profiles

MASTERPROFILE - Riveting connection of C profiles 2

Plasterboard assembly tools

MASTER-PROFIL ® - One hand section setting pliers for studs and tracks

103948

€43.25

Pliers for connecting C and U profiles. It is possible to connect profiles with a thickness of 1 + 1 mm.

Floor mounting tools

EDMA na laminátové parkety - 230 mm STRATICUT

104103

€87.81

Nástroj na rezanie laminátovej podlahy. Umožňuje rovné a rezy v uhle od 0-90°. Možné rezy po dĺžke do hrúbky 12 mm až do šírky 230 mm Hlavnou výhodou je bezprašné a nehlučné rezanie laminátovej podlahy.

Sheet metal shears

EDMA SUPERCOUP NR3 - Bearing shears for corrugated sheet metal

10204

€36.45

Shears the following materials: - galvanized sheet 1.2 mm - Not cut 0.6 00 - Aluminium 2.0 mm - PVC 2.3 mm

Showing 1-161 of 161 item(s)

Product added to compare.